Placement of a fixed reinforcement bar in a guitar neck can have many rewarding qualities, but in doing so you need to take certain precautions to give you the strongest possible installation to resist the constant tension that is placed on the neck by the guitar strings. We will guide you through these steps and give you the pros and cons of installing a fixed reinforcement bar in your acoustic guitar neck.
Read more » Guitar Building - Fixed Neck Reinforcement - The Facts
Guitar Building - Fixed Neck Reinforcement - The Facts
Guitar Building - Installing Fixed Neck Reinforcement
If you want the greatest strength with a fixed reinforcement method in your acoustic guitar neck and don't want the hassle of the adjustable truss rod, follow these useful steps to install a high strength to weight ratio T6 Structural Aluminum bar in your guitar neck. We give you all the details you will need to make a perfect installation and a long lasting, trouble-free guitar neck.
Read more » Guitar Building - Installing Fixed Neck Reinforcement
Guitar Building - How to Glue the Neck Scarf joint
This is probably the most important joint on the neck and proper alignment, registration and support during gluing is a must. We should you just how to accomplish the steps necessary to perform a perfect glue joint for the Guitar Scarf Joint. Also included is a link to free PDF plans you can download to make one of these useful jig yourself.
Read more » Guitar Building - How to Glue the Neck Scarf joint
Acoustic Guitar - Bolt on Neck Construction
Cross Dowel Locations:
The cross dowels are located quite close to the heel side of the tenon. This is done to give as much strength to the tenon as possible by leaving wood in front of the tenon at the cross dowel locations.
Cut everything for the neck tenon and the head block per the plans. Next I dry fit the neck to the Head Block to make sure everything is within tolerance. I would also recommend that you oversize the holes for the bolts to allow for miss-alignment problems when it comes to attaching the neck to the guitar body.
Read more » Acoustic Guitar - Bolt on Neck Construction
Guitar Repair - How to Remove a Fingerboard
Make Beginning Preparations:
Remove the strings completely from the guitar. Make a heavy cardboard template that will cover the upper 1/2 of the guitar top completely to protect it from the heat of the iron. Tape it securely into place so it will not slide accidentally. Meanwhile, plug in your flatiron and let it heat up on its highest setting.
Remove the Guitar Nut by taking a small block of wood and placing it on the fingerboard and resting against the Nut. Give the wood a sharp rap with a plastic tipped hammer and the nut should pop right off.
Read more » Guitar Repair - How to Remove a FingerboardAll Our News
- Best Review - Top 3 Cool Gifts for Cycling Enthusiasts
- Best Review - Top 7 Save Money on Dog Care
- Best Review - Top 6 Gifts for Mother's Day
- Best Review - Top 5 Office Tools to Reduce Stress at The Workplace
- Best Review - Top 3 The Eight Presidents From Virginia – Their Birthplace
- Best Review - Top 3 Revenue Sharing Sites for Freelance Writers
- Best Review - Top 3 Retrospective Meeting Tips For A Scrum Master



Recent comments
Wow! So many things to do in
Hi, I think you can visit for
I think that this article can
You also have a nice
I was looking for wallpaper
I was looking for wallpaper
There's also a great website
Cool, thanks for the link!
Another neat article on
There are some really cool